SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklift
Used Forklift Part - Unavoidably, lift truck parts will eventually wear out and require replacing. The choice of obtaining brand new parts could become pricey so one more idea is to acquire used components. This can save a lot of money eventually. It is a great idea to obtain used lift truck parts that have been reproduced. These components would guarantee that you are getting components which would work for a long time and be productive.
Remanufacturing worn out or broken components is a more cost effective way overall than rebuilding. With rebuilding parts, only the parts that are broken or worn out get replaced, which means that other wearable components might break down soon after purchase.
Remanufactured components are cleaned after being taken apart and have the unusable components replaced. This technique can provide the best guarantee for used components. All wearable parts are replaced regardless of age or wear which is another rationale why reproduced components overall work so much better. Whatever component within the part is brand new and this offers much longer life to the used part. Based on the lift truck components that are being redone, the cleaning process and the complete remanufacturing process will vary.
After complete disassembly, the engines are oven cleaned. Different components of the engine like for instance spark plugs, pistons, rings, filters, valves, and valve springs could be replaced during the remanufacture process. The engines are hot tested after reassembly to ensure that there are no noise, no oil pressure problems, no leaks or any vacuum.
Transmissions are one more thing which is oven cleaned after being disassembled. The transmission is then washed. A thorough examination is performed in order to check for any cracks. Bearings, bushings and seals are all replaced. Usually, the replacement components used on transmission parts meet OEM specifications.
Some forklift parts such as torque converters, the alternator, the water pump, steer axles and the starter could be quite serviceable after worn parts are replaced. The electronic control in the electric forklift is maintained by the control card. This particular card can even be reproduced with replacing all aged and worn out parts. Unlike various forklift components the control card could only have the worn and aged components replaced.
Components that are remanufactured have to be comprehensively examined upon reassembly to guarantee they are in good condition before being sold. When obtaining these parts, it is a good idea to be sure that they have undergone all of the proper testing and inspections. On certain bigger parts such as steer axles, engines and transmissions, OEM specification replacement parts should be used.
The dealer of used forklifts and components can guarantee that the remanufactured components have met OEM specifications and that these components meet industry standards. Lots of details go into remanufacturing second-hand components. This attention to detail offers more serviceability out of remanufactured components compared to the components that were only rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LOCAL: (626) 400-5849
556 S Fair Oaks Ave 101-319
Pasadena, California
forkliftpartspasadena.com
Email Us
About Us